Skip to main content

OVERVIEW

Two years ago, DCX pioneered introducing scalable and modular Immersion Enclosure & Immersion Rack System, delivered to thousands of customers. With new overclocking firmware and 6kW PSU’s we had to improve the system to make it the best option for high performance mining. Upgraded PRO9 Immersion Mining Enclosure has been engineered to provide effective heat transfer for overclocked miners. With rated cooling capacity of up to 48kW it will support S19 with optional 6kW PSU or dense 12 x Whatsminer configs.

In opposite to long tanks with multiple miners, DCX Immersion Enclosure saves space, allows starting with small investment of single enclosure system, and allows mining at scale with multiple immersion tanks connected to primary cooling loop. Miner specific and replaceable internal components provide balanced flow and saturation of each device. Bigger plate heat exchanger, fittings, pump will support your operation during the hot summer days. Proven 48kw heat transfer performance from each enclosure, and over 140kW (3 level rack) in DCX immersion mining rack. In the result of smart and efficient design ΔT of the system reaches from 15C to even 20C instead of 10C which is a generic in long tanks). The system has been designed for heat reuse applications – elevated temperature set point (40C/104F inlet & 60C / 140F outlet) enables additional cost savings when purchasing heat rejection devices (dry coolers) and allows for sustainable and effective heat utilization for facility heating or different industrial applications. Higher set point temperatures also allow to plan efficient cooling of cryptomining operation in the hottest areas of the globe, including the Middle East ambient temperatures.

We deliver the immersion tank with additional sensor which remotely monitors the temperature. We chose the heigh of the tank so customers can fit longer miners (K3 and similar) and manage the ethernet and power cables. Stackable in PRO9 Immersion Rack System, DCX PRO9 Immersion Enclosure can be installed in facility or high-density containers.

FEATURES

  • 70% higher heat transfer performance than any other solution
  • Hosts new M56 / M50 and overclocked S19  miners.
  • 30-40 x M56 miners per Immersion Rack
  • 4MW and 720 miners – most powerful and affordable Immersion Mining Containers
Get the SpecsheetRequest Quote

GET IN TOUCH

You have a plan or question about liquid cooling project? We have answers. Reach out to our experts directly and get a professional & custom-sized immersion or hydro cooling technical project – at no charge. Let’s Make Things Happen!

WE SHIP & INSTALL WORLDWIDE

PRO 9 IMMERSION MINING ENCLOSURE

The most popular immersion cooling system in the world, but upgraded with 40% larger heat exchanger and 1.5x stronger pump than its predecessor. Dedicated for overclocked cryptomining delivers 48kW heat transfer from single enclosure at 40C/104F inlet & 60C/140F outlet. Dedicated for all popular miners, hosting 8 x Antminer S19 family or similar and 12 x M30 MicroBT Whatsminers. PRO9 Immersion Mining Enclosure is equipped with miner specific flow plates and grids to provide balanced flow and saturation for all miners. System can be stacked in Immersion Rack System for megawatt sized installations.

Technical Specification

ComponentSpecification
DimensionsL: 80cm / 31.5" | W: 85cm / 33.5" | H: 50 cm / 19"
Heat Transfer Capacity48kW
General constructionAll-steel
Heat ExchangerBrazed Plate with nominal capacity 150kW
Circulation PumpCustom circulation pump
Dielectric Fluid200-230L
Heat RejectionPrimary water or water-glycol loop
Max temperaturesInlet: 40C / 104F | Outlet: 68C/154F
Power DistributionDCX Immersion Enclosure PDU
MonitoringOptional sensors with supply or return temperatures monitoring.

Features

  • 70% higher heat transfer performance than any other solution
  • Hosts new M56 / M50 and overclocked S19  miners.
  • 30-40 x M56 miners per Immersion Rack
  • 4MW and 720 miners – most powerful and affordable Immersion Mining Containers
Get the SpecsheetRequest Quote

GET IN TOUCH

You have a plan or question about liquid cooling project? We have answers. Reach out to our experts directly and get a professional & custom-sized immersion or hydro cooling technical project – at no charge. Let’s Make Things Happen!

WE SHIP & INSTALL WORLDWIDE

PRO 9 IMMERSION MINING ENCLOSURE

The most popular immersion cooling system in the world, but upgraded with 40% larger heat exchanger and 1.5x stronger pump than its predecessor. Dedicated for overclocked cryptomining delivers 48kW heat transfer from single enclosure. PRO9 Immersion Mining Enclosure is equipped with miner specific flow plates and grids to provide balanced flow and saturation for all miners.

Enclosures stacked in Immersion Rack System are used as building blocks for megawatt sized installations. PRO9 Immersion Mining Enclosures can be stacked in 3 level racks giving ability to host 24 MicroBT M56 Whatsminers, 30x M30/M50 Whatsminers and 24 x Bitmain s19 Antminers form factor in the single Immersion Mining Rack system – all within just 1 sq.m.

Technical Specification

ComponentSpecification
DimensionsL: 94cm / 37" | W: 85cm / 33" | H: 180 cm / 71" (single rack)
Heat Transfer Capacity144kW (3 level rack)
General constructionAll-steel with stainless steel frame
Dielectric Fluid3-4 x 200-230L
Heat RejectionPrimary water or water-glycol loop
Max temperatureInlet: 40C / 104F | Outlet: 68C/154F
Power DistributionDCX Immersion Enclosure PDU
MonitoringOptional sensors with supply or return temperatures monitoring.

Features

  • 70% higher heat transfer performance than any other solution
  • Hosts new M56 / M50 and overclocked S19  miners.
  • 30-40 x M56 miners per Immersion Rack
  • 4MW and 720 miners – most powerful and affordable Immersion Mining Containers
Get the SpecsheetRequest Quote

GET IN TOUCH

You have a plan or question about liquid cooling project? We have answers. Reach out to our experts directly and get a professional & custom-sized immersion or hydro cooling technical project – at no charge. Let’s Make Things Happen!

WE SHIP & INSTALL WORLDWIDE

Quick intro

Unboxing of the Immersion Enclosure package and quick intro to the system components.

What you get – bundle

Enclosure with a 40kW dry cooler. We have a new ICP40 now, but you see what you get in the bundle package.

Installation & Startup

You bought the package – now what? Quick installation guide for effective commissioning of this smart immersion cooling system.

OVERVIEW

Two years ago, DCX pioneered introducing scalable and modular Immersion Enclosure & Immersion Rack System, delivered to thousands of customers. With new overclocking firmware and 6kW PSU’s we had to improve the system to make it the best option for high performance mining. Upgraded PRO9 Immersion Mining Enclosure has been engineered to provide effective heat transfer for overclocked miners. With rated cooling capacity of up to 48kW it will support S19 with optional 6kW PSU or dense 12 x Whatsminer configs.

In opposite to long tanks with multiple miners, DCX Immersion Enclosure saves space, allows starting with small investment of single enclosure system, and allows mining at scale with multiple immersion tanks connected to primary cooling loop. Miner specific and replaceable internal components provide balanced flow and saturation of each device. Bigger plate heat exchanger, fittings, pump will support your operation during the hot summer days. Proven 48kw heat transfer performance from each enclosure, and over 140kW (3 level rack) in DCX immersion mining rack. In the result of smart and efficient design ΔT of the system reaches from 15C to even 20C instead of 10C which is a generic in long tanks). The system has been designed for heat reuse applications – elevated temperature set point (40C/104F inlet & 60C / 140F outlet) enables additional cost savings when purchasing heat rejection devices (dry coolers) and allows for sustainable and effective heat utilization for facility heating or different industrial applications. Higher set point temperatures also allow to plan efficient cooling of cryptomining operation in the hottest areas of the globe, including the Middle East ambient temperatures.

We deliver the immersion tank with additional sensor which remotely monitors the temperature. We chose the heigh of the tank so customers can fit longer miners (K3 and similar) and manage the ethernet and power cables. Stackable in PRO9 Immersion Rack System, DCX PRO9 Immersion Enclosure can be installed in facility or high-density containers.

FEATURES

  • 70% higher heat transfer performance than any other solution
  • Hosts new M56 / M50 and overclocked S19  miners.
  • 30-40 x M56 miners per Immersion Rack
  • 4MW and 720 miners – most powerful and affordable Immersion Mining Containers

Get in Touch & Get the Quote

We’d love to help you in your project with our liquid cooling systems.

We need more info:

We need basic information required to size the DCX Immersion Mining system correctly:

  • type and number of ASIC miners or GPUs
  • expected miners power
  • your plan for heat rejection – we can deliver immersion optimized
  • dry cooler or connection to local water loop
  • city / country of your operation – to make sure w will deliver
  • expected performance in your maximum ambient temperature and to quote shipping cost.